---
title: "Setup"
space: "Smart Display"
url: "https://docs.onfuse.ch/sd-em/setup"
updated: "2026-02-20"
---

On the first boot, a setup page will appear where you can completely setup the display the way it was intended.

## Prerequisites

- Smart Display powered on
- (Optional) ONFUSE Account for the cloud connection
- (Optional) ONFUSE Gateway for cloud connection & emergency phone functionality (upcoming)
- (Optional) Compatible elevator controller

## Step by step guide

### Step 1 - Language

This setting will also apply for the spoken texts inside the cabin.

 ![](/files/1_setup.png)

### Step 2 - Controller

When you only have a single elevator, you can use the default controller. If you are using a duplex / triplex configuration, it is recommended to either enter the IP Address or let the autoscan finish (There will be popups in 20 Seconds with all devices on the network).

 ![](/files/2_setup.png)

### Step 3 - Interface

 Please checkout [Operation Modes](/sd-em/operation-modes) for additional information. Recommended setting is **COP with input.**

![](/files/3_setup.png)

### Step 4 - Cloud connection

This setting will also apply for the spoken texts inside the cabin.

 ![](/files/4_setup.png)

### Step 5 - Version

Here you can see the current version of the elevator and all the enabled modules. You can enable modules lateron form the connect app.

 ![](/files/5_setup.png)